ClipVault 680 | The Complete Car Fastener Rescue Kit

ClipVault 680

The Complete Car Fastener Rescue Kit

Every driver knows the sound. That sharp little snap underneath the wheel arch, behind the door card, or inside the bumper trim — the sound of a plastic clip giving up.

And suddenly a five-minute job becomes a weekend problem.

You either drive around with a panel that rattles at every speed bump, book a garage visit that costs more than the part is worth, or spend an afternoon ringing round motor factors trying to match one obscure little fastener that nobody seems to stock.

Here's what most people never realise: the problem isn't finding a clip. The problem is finding the right clip.

Most replacement clips on the market are sold as "universal fit" — which usually means close enough to push in, but never quite right. The retaining tabs sit at the wrong angle. The stem is a fraction too short. And within a few months of road vibration, the panel works loose all over again. It's why so many people end up replacing the same clip two and three times.

The ClipVault 680 was built to solve that properly, once and for all.

Inside the case you'll find 33 precision-matched fastener types covering the vast majority of British, European, Japanese, Korean and American vehicles — bumper rivets, door trim retainers, wheel-arch liners, splash-guard pins, engine cover fasteners, boot trim clips, and the awkward fiddly ones that only ever seem to break on a Sunday.

680 pieces in total, organised in a sectioned hard case so you can see at a glance exactly which clip you need, rather than tipping a bag of jumbled plastic onto the driveway and squinting at each one in turn. Open the case, find the match, fit it in seconds. The job that used to ruin a Saturday afternoon is finished before the kettle's boiled.

For the complete-job version of the kit, the case also includes a full set of trim removal tools — a fastener removal tool with a forked tip for lifting stubborn clips out cleanly, four angled plastic trim wedges for working into tight gaps without scratching paintwork or marking interior panels, plus a selection of cable ties and replacement washers for jobs that need a little extra. If you're already kitted out, the clips-only variant covers the essentials. Choose the option that suits your toolbox below.

Made from reinforced black nylon, the clips resist heat, vibration, road salt and the relentless damp of a UK winter. They won't warp, won't crack, and won't go brittle the moment cold weather arrives — so once a panel is back together, it stays back together.

The compact storage case measures 17 x 17 x 17.5 cm (6.7" x 6.7" x 6.9") and weighs approximately 680 g (1.5 lb) for the clips-only variant, or 920 g (2 lb) with the tool set included — so it lives easily in a boot, a toolbox, or under the workbench, ready the moment you need it.

Whether you're refitting a door card, replacing a wheel-arch liner after a kerb scrape, tidying up a tired interior trim, or working through a full restoration, the ClipVault 680 means you never have to stop a job halfway through.

No more wasted Saturdays. No more rattling trim. No more dealer mark-ups on parts that should cost pennies.

Limited Time Offer

Save 30% — This discount is available whilst our current advertising campaign runs. We cannot guarantee how long this offer will last.

✔ Free Shipping
✔ Secure Payment

Add the ClipVault 680 to your basket and put an end to broken clips for good.